To
enable online control function.
SMS
：
*onlineoff*
To
end online control function.
7. Sleep Function
(Lowest Power Consumption)
7.1 Interval Sleep
Device will go to deep sleep mode and wake up after appointed interval, and stay awake
for 12 mintues. If there is no new commands received in 12 minutes, device will go back to
deep sleep mode for the next set interval.
Note: System will shut down GPS and GSM module during deep sleep period, so no call
or SMS can be received or responded.
SMS
：
*sleep*1-99*
1-99 refers to the hours of appointed sleep interval.
Example
*sleep*6* means to enable device to go to deep sleep mode and wake up in every 6 hours.
7.2 Motion Sleep
Motion Sleep function enables device to stay in deep sleep mode and wakes up
once motion is detected. System will upload the current location of the device. If
motion continues, system will stay on and operate the previous tracking settings. If
there is no further motion detected, device will go back to deep sleep in 12 minutes.
And the circle repeats.
Note: System will shut down GPS and GSM module during deep sleep period, so
no call or SMS can be received or responded.
SMS:
*sleepv*
To enable motion sleep function.
SMS:
* sleepoff*
To turn off motion sleep function.
8. WiFi Functions
WiFi function suitable for models support WiFi only. Please check your models number in
Hardware Specification to confirm.
8.1 WiFi Fence
8.1.1 Set WiFi Fence
WiFi fence function enables device recognising the appointed WiFi router signal as a
fence, similar to Geofence. Alerts will be triggered when device enters or exits fence.
There are a few steps to setup a WiFi fence.
Step 1
SMS
*wifilist*
Device will detect WiFi signal nearby and reply a list with wifi router names in orders.