Milnor 76028 CBW, Schematic/Electrical Parts

Page: 51 / 299

Milnor
®
Allied
Interface Specifications and Signals, CBW
®
PELLERIN MILNOR CORPORATION
Table 5: Discharge Interface Numeric Output Signals and Digit Order—G3 CBW (Mark 9)
Common
Conn.*
Most
Significant
Dedicated Connections (Binary Data Signals)
Least
Significant
Signal name on schematic
(e.g., Drycode A, B, etc.)--> K J H G F E D C B A
MTA Number n/a 14 14 14 14 14 14 14 14
Pin Number n/a 10 • 18 10 • 8 10 • 17 10 • 7 10 • 16 10 • 6
14-10 •
4-15
14-10 •
4-5
4 • 14 4 • 13
Wire Number n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a
Display/code -- Not available.
1000***
Formula or
Goods
Codes (000 -
999)
Board/code -- o6/21 o6/20 o6/19 o6/18 o6/17 o6/16 o6/15 o6/14 o6/13 o6/12
Multi-terminal n/a WCIR WCIR WCIR WCIR
Pin Number n/a 4 • 20 3 • 19 2 • 18 1 • 17
Wire Number n/a
DDH •
DDG
DDF •
DDE
DDD •
DDC
DDB •
DDA
Display/code -- Not available.
16 Drycodes
or 16
Extract
Codes (00 -
15)
Board/code -- o1/3 o1/2 o1/1 o1/0
Multi-terminal n/a WCIR WCIR
Pin Number n/a 6 • 22 5 • 21
Wire Number n/a
DDM •
DDL
DDK •
DDJ
Display/code -- Not available.
4 Cooldown
Codes (0 -
3)
Board/code -- o1/5 o1/4
Multi-terminal n/a WCIR WCIR WCIR
Pin Number n/a 9 • 25 8 • 24 7 • 23
Wire Number n/a
DDT •
DDS
DDR •
DDQ
DDP •
DDN
Display/code -- Not available.
8 Destina-
tion Codes
(0 - 7)
Board/code -- o1/8 o1/7 o1/6
Multi-terminal
or MTA No.
WCIR** mta14 mta14 WCIS WCIS WCIS WCIS WCIS WCIS WCIS WCIS
Pin Number 31 or 32 10 • 19 10 • 9 8 7 6 5 4 3 2 1
Wire Number DD5 n/a n/a DCH DCG DCF DCE DCD DCC DCB DCA
Display/code -- Not available.
256 or
1000***
Customer
Codes (000 -
255 or 999)
Board/code -- o6/23 o6/22 o1/23 o1/22 o1/21 o1/20 o1/19 o1/18 o1/17 o1/16
MTA Number n/a 13 13 13 13 13 13 13 13 13
Pin Number n/a
13-10 •
14-1
9 • 19 8 • 18 7 • 17 6 • 16 5 • 15 4 • 14 3 • 13 2 • 12 1 • 11
Wire Number n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a
Display/code -- Not available.
Weight (0 to
409.5 Lbs)
*** @
Board/code -- o6/9 o6/8 o6/7 o6/6 o6/5 o6/4 o6/3 o6/2 o6/1 o6/0
* For outputs from Milnor, Milnor does not normally assign either pin of the potential-free contact as the common. Hence,
both pins have unique pin and wire numbers. These are listed together in the same cell, with a dot between (e.g., 1 • 17).
** To provide eight Customer code signals with limited available terminals, Customer codes A through H, along with the
"Start Press" and "Single Cake" signals, had to share board-level connector 1MTA14-10 (WCIR, pin 31 or 32).
*** Requires optional extra data pass board. Currently, outputs on this board are not wired to multi-terminals in the electric
box. Connections must be made directly to the pins on the board-level MTA connectors
@ A range of load weights from 0 to 409.5 (in tenths of pounds) can be passed. This requires twelve signals–the ten shown in
the table plus L and M. Data for L: connector 6MTA14, pins 2 and 11; board/code o6/10. Data for M: connector 6MTA14,
pins 3 and 12; board/code o6/11.
45