manualshive.com logo in svg

Milnor 76028 CBW, Schematic/Electrical Parts

Share
Download
Milnor 76028 CBW Schematic/Electrical Parts Download Page 38

Safety—Continuous Batch Washer

PELLERIN MILNOR CORPORATION

WARNING  2 : Entangle and Crush Hazards

—Contact with moving components normally

isolated by guards, covers, and panels, can entangle and crush your limbs. These components
move automatically.

• Do not remove guards, covers, or panels.

• Do not reach into the machine housing or frame.

• Keep yourself and others off of machine.

• Know the location of all emergency stop switches, pull cords, and/or kick plates and use

them in an emergency to stop machine motion. These may not stop certain devices such
as pumps on some machines.

CAUTION  3 : Burn Hazards

—Contact with hot goods or machine components can burn you.

• Do not remove guards, covers, or panels.

• Do not reach into the machine housing or frame.

3.

Safety Alert Messages—External Mechanical Hazards

 [Document

BIUUUS12]

The following are instructions about hazards around the front, sides, rear or top of the machine.

4.

Safety Alert Messages—Cylinder and Processing Hazards

[Document BIUUUS13]

The following are instructions about hazards related to the cylinder and laundering process.

WARNING  4 : Confined Space Hazards

—Confinement in the cylinder can kill or injure

you. Hazards include but are not limited to panic, burns, poisoning, suffocation, heat prostration,
biological contamination, electrocution, and crushing.

• Do not attempt unauthorized servicing, repairs, or modification.

WARNING  5 : Explosion and Fire Hazards

—Flammable substances can explode or ignite

in the cylinder, drain trough, or sewer. The machine is designed for washing with water, not any
other solvent. Processing can cause solvent-containing goods to give off flammable vapors.

• Do not use flammable solvents in processing.

• Do not process goods containing flammable substances. Consult with your local fire

department/public safety office and all insurance providers.

5.

Safety Alert Messages—Unsafe Conditions

 [Document BIUUUS14]

5.1.

Damage and Malfunction Hazards

5.1.1.

Hazards Resulting from Inoperative Safety Devices

WARNING  6 : Multiple Hazards

—Operating the machine with an inoperative safety device

can kill or injure personnel, damage or destroy the machine, damage property, and/or void the
warranty.

• Do not tamper with or disable any safety device or operate the machine with a

malfunctioning safety device. Request authorized service.

32

Summary of Contents for 76028 CBW












































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands