Milnor 30022H7 Series, Service, Page: 19 / 76

Remove cover (not shown) from the door locking mechanism (FIGURE 7). Use screwdriver to push
down the door lock slider pin (FIGURE 7). Rotate the shaft (FIGURE 8), counter-clockwise to
remove from the locking mechanism.
If door was locked due to a power failure, remove the goods,
then see “Assembling the door locking handle” in this
section. If the door was locked due to an interlock failure,
determine the cause of the failure (coil failure, mechanical
interference, etc.) and repair, then see “Assembling the door
locking handle.”
+,-./ 0
+,-./
+,-./ 1
+,-./ 2
!"#$ %&''"(&%%%&))*+&(,-
./" 0%%&&12 0%%&&'2