INSTALLATION PROCEDURE
1.
Remove the conveyor idlers currently at the desired points of installation.
2.
Remove the foot plates and modify the idler frame at both ends of the idlers as shown .
3.
Insert the MSI’s in the place of the removed idlers. The MSI is designed to use the existing holes in the
stringer and should not require further drilling. Install the mounting bolts and nuts, but do not tighten .
Remove the idler clips. Refer to Outline and Dimensions.
Insure that there is sufficient clearance between the return belt and the MSI and test weight (when used
during the calibration procedure).
12.7 mm
(0.5")
before
100 mm
(4")
after
customer’s idler
MSI belt scales
location of
removed idlers
material flow
test weight(s)
test weight(s)
PL-327
5
