Page 13 of 32
Optional: it is possible to use an accessory
to remove the support, the Milliflex Oasis
®
membrane support removal tool (item
MMSUPREMV).
Figure 28: membrane support removal with
removal tool — part 1
Figure 29: membrane support removal with
removal tool — part 2
Figure 30: membrane support removal with
removal tool — part 3
Note: If some filtered liquid remains in
the pump head, it is possible to remove
it with a dry, sterile wipe. Regardless of
the amount of liquid, it does not impact
the test results.
3.4 Waste
After use, the filtration units and membrane
supports can be stacked. Place one support
into a filtration unit and stack the second
filtration unit, then repeat the operation to
save space.
Figure 31: stacking of filtration units and
membrane supports for waste
Please refer to the waste management
document available on our website to
recycle the filtration unit material.