7
2 Getting Started
This chapter provides information to help you use the Model APC ErgoTouch Pro 2
Handheld Airborne Particle Counter including:
• Instrument Description
• Using the Instrument Stand and Stylus
• Providing Power
• Performing a Zero Check
• Installing an Isokinetic Inlet
• Installing a Temperature/Relative Humidity Probe
Instrument Description
The Model APC ErgoTouch Pro 2 has many features to make measurements convenient.
They are described in detail below.
Using the Instrument Stand and Stylus
The Model APC ErgoTouch Pro 2 is equipped with an
integral instrument support stand. To open the stand,
grasp it by the large finger hole and pull it out until it
locks into place. Be careful not to overextend the stand.
To store the stand out of the way when not in use,
simply push the stand back until it snaps into place.
The Model APC ErgoTouch Pro 2 is also equipped with
a plastic stylus for use with the touch screen interface.
The stylus locks into place in the case near the top of
the unit when not in use.
Stand
USB Host and
Device Ports
Ethernet Port
Power Entry
Isokinetic Inlet
Stylus
Touch -Screen
Start Sample
Power Button
Summary of Contents for APC ErgoTouch Pro 2
Page 1: ...APC ErgoTouch Pro 2 Airborne Particle Counter Operation Manual...
Page 34: ...34...
Page 35: ...35...
