Milli-Q Millipore, User Manual, Page: 32 / 92

32 Milli-Q® Reference System
Registering UV Lamp timer
Introduction The timer used for the UV 185 nm Lamp must be reset when the System is installed.
If this is not done, then the message indicating that a Lamp replacement is needed is
shown too early.
NOTE:
Before doing this, make sure that the date and time have been checked for accuracy.
Procedure This procedure shows how to reset the timer used for the UV 185 nm Lamp.
Step Action Diagram
1 Place the System in STANDBY
Mode.
2 Select Menu.
Press
.
3 Select Maintenance.
Press
.
4 Select Install UV 185 nm Lamp.
Press
.
Continued on next page