OM-245892 Page 11
!
Welding wire is electrically live when
gun trigger is used to jog wire.
Refer to wire feeder manual for instructions on
feeding wire through feeder.
5-5.
Threading Welding Wire Through Gun
Ref. 804 544-B / 804 545-B
Tools Needed:
Lay gun cable out straight. Press Jog switch until about 6
in. (152 mm) of wire is sticking out end of contact tip.
Cut off wire. Close and
latch wire feeder door.
.
Turn OFF coolant supply before threading wire
through gun.
For XR-AlumaPro Plus Gun:
.
Verify pressure adjustment
on handle matches the wire
type. See Section 6-2.
Summary of Contents for XR-A AlumaPro Plus 15 ft
Page 25: ...OM 245892 Page 21 Notes...
Page 34: ...Notes...