Miller XMT350 CC/CV Auto-Line CE, Owner'S Manual

Page: 40 / 56

A complete Parts List is available at www.MillerWelds.com
OM-2254 Page 34
8-5. Typical Connection For Voltage-Sensing Feeder GMAW/FCAW Process
264 348-A
!
Turn off power before making con-
nections.
1 Positive (+) Weld Output Terminal
2 Negative (−) Weld Output Terminal
3 Ground Cable to Workpiece
4 Workpiece
5 Voltage Sensing Clamp
6 Gun
7 Gun Trigger Receptacle
8 Wire Feeder
9 Gas Hose
10 Gas Cylinder
Use of shielding gas is dependant on Wire
Type.
The connection diagram illustrates
DCEP (reverse polarity) suitable for all
wires except self-shielded FCAW. The
majority of self-shielded FCAW wires
require DCEN (straight polarity).
2
3
9
10
8
7
5
6
4
1