Miller XMT350 CC/CV Auto-Line CE, Owner'S Manual

Page: 36 / 56

A complete Parts List is available at www.MillerWelds.com
OM-2254 Page 30
SECTION 8 − GMAW/FCAW OPERATION
8-1. Typical Connection For Remote Control Feeder GMAW/FCAW Process
264 343-A
!
Turn off power before making
connections.
1 Remote 14-Receptacle
2 Positive (+) Weld Output Terminal
3 Negative (−) Weld Output Terminal
4 Ground Cable to Workpiece
5 Workpiece
6 Gun
7 Wire Feeder
8 Gas Hose
9 Gas Cylinder
Use of shielding gas is dependant on Wire
Type.
The connection diagram illustrates
DCEP (reverse polarity) suitable for all
wires except self-shielded FCAW. The
majority of self-shielded FCAW wires
require DCEN (straight polarity).
3
4
5
6
7
8
9
1
2