Complete Parts List is available at www.MillerWelds.com
OM-249 795 Page 43
8-6. Changing Engine Oil, Oil Filter, and Fuel Filter
250 916-A
!
Stop engine and let cool.
1
Oil Drain Valve
Change engine oil and filter accord-
ing to engine owner’s manual.
NOTICE
−
Close valve and valve
cap before adding oil and running
engine.
Fill crankcase with new oil to full
mark on dipstick (see Section 8-1).
2
Fuel Filter
3
Fuel Line
Replace line if cracked or worn.
Install new filter with arrow pointing
in the direction of fuel flow. Wipe up
any spilled fuel.
Start engine, and check for fuel
leaks.
!
Stop engine, tighten connec-
tions as necessary, and wipe
up fuel.
Reset oil maintenance countdown
by leaving the engine off and flip-
ping Engine Control switch from
Auto Speed to Run three times.
Tools Needed:
Oil Fill
Full
Oil Check
2
3
1
