Complete Parts List is available at www.MillerWelds.com
OM-249 795 Page 33
Not
Active
Lift Arc start. Optimum for flat joint to end weld with crater fill, allow-
ing for addition of filler, without loss of shielding gas
Not
Active
Lift Arc start. Preset maximum current. Unit automatically pulses
maximum output 40% of the time and 25% of peak output for 60%
of the time based on 100 pulses per second. Meters display aver-
age output. Auto Stop feature allows arc to be broken without loss
of shielding gas.
Not
Active
No Lift Arc start; use external high-frequency device or scratch start
TIG
SOFT
Flat or horizontal welds with XX18 electrode with short weld cables
(0)
Starting point for XX18, XX13, XX14, XX24, and XX22 electrodes
STIFF
Starting point for XX10 and XX11 electrodes
Wire feeder connects to
Remote 14 receptacle
SOFT
Starting point for stainless steel wire (high inductance)
(0)
Starting point for mild steel wire
STIFF
Starting point for aluminum wire (low inductance)
