OM-226 288 Page 12
SECTION 3
−
INSTALLATION
3-1. Important Information Regarding CE Products (Sold Within The EU)
!
This equipment shall not be used by the general public as the EMF limits for the general public might be exceeded during welding.
This equipment is built in accordance with EN 60974
−
1 and is intended to be used only in an occupational environment (where the general public
access is prohibited or regulated in such a way as to be similar to occupational use) by an expert or an instructed person.
Wire feeders and ancillary equipment (such as torches, liquid cooling systems and arc striking and stabilizing devices) as part of the welding
circuit may not be a major contributor to the EMF. See the Owner’s Manuals for all components of the welding circuit for additional EMF exposure
information.
S
The EMF assessment on this equipment was conducted at 0.5 meter.
S
At a distance of 1 meter the EMF exposure values were less than 20% of the permissible values.
3-2. Specifications
Type of
Input
Power
Welding
Power
Source
Type
Wire Feed
Speed
Range
Wire
Diameter
Range
Input
Welding
Circuit
Rating
IP
Rating
Max. Wire
Spool
Capacity
Overall
Dimensions
Weight
Open-Circuit/
Arc Voltage,
14
−
110
Volts DC
Constant
Voltage (CV)
Or Constant
Current (CC)
DC Power
Source Only
50
−
780 ipm
(1.3
−
19.8
mpm)
Depending On
Arc Voltage
*Solid Steel:
.023
−
.062 in.
(0.6
−
1.6 mm);
Stainless Steel:
.023
−
.052 in.
(0.6
−
1.3 mm);
Flux Cored:
.030
−
.062 in.
(0.8
−
1.6 mm)
330 Amperes
At 60%
Duty Cycle
23
14 lb (6.4 kg),
8 in (203 mm)
Length: 18 in.
(457 mm)
Width: 7-1/4 in.
(184 mm)
Height: 12-3/4 in.
(324 mm)
28 lb
(13 kg)
*Maximum gun length is 10 ft. for solid steel .062 in. wire.
3-3. Gun Recommendation Table
Process
Gun
GMAW
−
Hard or Cored Wires
Bernard Q300 or Q400
FCAW
−
Self-Shielding Wires
FC-1260
Dura-Flux
