I235 Rev. B
MILLER ShadowLite™ SERIES
BEAM ANCHOR
Model 8816-14
The Miller ShadowLite™ beam anchor is designed to provide a single user with an easily installed
5,000 lb. anchorage connector on W-shaped and other flanged beams. The Miller ShadowLite™ ratcheting
beam anchor is designed to trail freely behind a worker on beams with flanges from 3" to 14" wide and up to
1 ¼ " thick.
I
. REQUIREMENTS
A. WARNINGS AND LIMITATIONS
Proper use of fall arrest systems can save lives and reduce the potential for serious injuries from a fall. The
user must be aware that forces experienced during the arrest of a fall, or prolonged suspension, may cause
bodily injury. Consult a physician if there is any question about the user’s ability to use this product.
Pregnant women and minors must not use this product.
Proper precautions should always be taken to remove any obstructions, debris, and other material
from the work area that could cause injuries or interfere with the operation of the product. Caution should
always be taken to insure that all equipment will be clear of recognized hazards before work begins.
Note: Users should be familiar with pertinent regulations governing this equipment. All individuals who use
this product must be correctly instructed on how to use the device, and must read and understand the
following instructions before use.
