.
A complete Parts List is available at www.MillerWelds.com
OM-272989 Page 33
6-4. Entering Setup Menu
1
Wire/Rod/Tungsten Minus (
−
) Button
2
Material Thickness Minus (
−
) Button
3
Material Thickness Plus (+) Button
4
Display
To enter the setup menu, simultaneously
press then release the Wire/Rod/Tungsten
Minus (
−
) button and Material Thickness
Plus (+) button. After entering the setup
menu, the Material Thickness light will flash.
To move to the next setup menu, press the
Material Thickness Plus (+) button.
To move to the previous setup menu, press
the Material Thickness Minus (
−
) button.
To exit the setup menu, simultaneously
press then release the Wire/Rod/ Tungsten
Minus (
−
) button and the Material Thickness
Plus (+) button.
Ref. 271491A
1
2
3
4
Notes
Work like a Pro!
Pros weld and cut
safely. Read the
safety rules at
the beginning
of this manual.
