Miller MigMatic 220, Owner'S Manual

Page: 10 / 56

OM-246 691 Page 6
Do not weld on drums or any closed containers.
Safe16 2012−05
Do not discard product (where applicable) with general waste.
Reuse or recycle Waste Electrical and Electronic Equipment (WEEE) by disposing at a designated collection
facility.
Contact your local recycling office or your local distributor for further information.
Safe37 2012−05
Disconnect input plug or power before working on machine.
Safe30 2012−05
ÍÍ
ÍÍ
Read Owner’s Manual and inside labels for connection points and procedures.
Safe67 2012−06
?
V
?
A
Consult rating label for input power requirements.
Safe34 2012−05
Welding wire and drive parts are at welding voltage during operation − keep hands and metal objects away.
Safe33 2012−05
<10
°
Falling unit can cause injury. Do not move or operate unit where it could tip.
Safe53 2012−05
3 1
Safe49 2012−05
Move jumper links as shown on inside label to match input voltage at
job site. Include extra length in grounding conductor and connect
grounding conductor first. Connect line input conductors as shown on
inside label. Double-check all connections, jumper link positions, and
input voltage before applying power.
Wear hat and safety glasses. Use ear protection and button shirt
collar. Use welding helmet with correct shade of filter. Wear complete
body protection.
Safe38 2012−05
Become trained and read the instructions before working on the
machine or welding.
Safe40 2012−05