Miller Migmatic 175, Owner'S Manual, Page: 12 / 32

OM-259 158 Page 8
SECTION 3 − SPECIFICATIONS
3-1. Serial Number And Rating Label Location
The serial number and rating information for this product is located on the back. Use rating label to determine input power requirements and/or rated
output. For future reference, write serial number in space provided on back cover of this manual.
3-2. Specifications
Do not use information in unit specifications table to determine electrical service requirements. See Sections 4-6 and 4-7 for information on con-
necting input power.
Model
Input Power
Single Phase
AC 50/60 Hz
Voltage
Rated Output
Max. Open
Circuit Volt-
age
Amperage/
Voltage
Range DC
Dimension Weight
MigMatic 175 230 Volts MIG
100% 60% 30%
34 V
30−150 A
15.5−21.0 V
L=769 mm (30.3
in.)
W=447 mm
(17.6 in.)
H=561 mm
(22.1 in.)
Net:
43.3 Kg (95.5
lb)
Ship:
45.4 Kg (100
lb)
60 A
17 V 100 A
19 V
150 A
21 V
Wire feed speed range 1,8 mpm to 18 mpm.
3-3. Environmental Specifications
A. IP Rating
IP Rating Operating Temperature Range Storage Temperature Range
IP21S
This equipment is designed for indoor use and
is not intended to be used or stored outside.
−10 to 40
°
C (14 to 104
°
F)
20 to 25
°
C (68 to 77
°
F)
IP21S 2014−06
B. Information On Electromagnetic Fields (EMF)
!
This equipment shall not be used by the general public as the EMF limits for the general public might be exceeded during welding.
This equipment is built in accordance with EN 60974−1 and is intended to be used only in an occupational environment (where the general public
access is prohibited or regulated in such a way as to be similar to occupational use) by an expert or an instructed person.
Wire feeders and ancillary equipment (such as torches, liquid cooling systems and arc striking and stabilizing devices) as part of the welding
circuit may not be a major contributor to the EMF. See the Owner’s Manuals for all components of the welding circuit for additional EMF exposure
information.
The EMF assessment on this equipment was conducted at 0.5 meter.
At a distance of 1 meter the EMF exposure values were less than 20% of the permissible values.
ce-emf 1 2010-10
C. Information On Electromagnetic Compatibility (EMC)
!
This Class A equipment is not intended for use in residential locations where the electrical power is provided by the public low−
voltage supply system. There can be potential difficulties in ensuring electromagnetic compatibility in those locations, due to con-
ducted as well as radiated disturbances.
This equipment complies with IEC 61000-3-11 and IEC 61000-3-12.
ce-emc 4 2014-07