5
FIG. A
IV.TRAINING
It is the responsibility of the user to assure that they read, understand, and follow all instructions and are
trained in the care and use of this device. Training should be repeated periodically and any time there is
a change of components within the system. Training must be conducted without exposing the trainee to a
fall hazard.
V. MAINTENANCE
A. SERVICING
Servicing must only be carried out by a Miller Fall Protection approved service technician trained in the
repair and service of Miller Fall Protection Falcon Series fall arrest lifeline systems/devices. A record log
of all servicing and inspection dates for this device must be maintained by the company safety officer.
This device must be returned to Miller Fall Protection or an approved service center whenever
subjected to fall arresting forces for physical inspection and recertification.
Only original Miller
replacement parts are approved for use in this device. Contact your Miller distributor or call Miller Fall
Protection’s Customer Service Department at 1-800-873-5242 for a return goods authorization number.
(The Following Note Applies Only To CSA Approved Products)
Note: CSA Z259.2.2 Requires Type
2 and Type 3 devices to be returned to the manufacturer or an approved service agent no more than 2
years after the date of manufacture for inspection and maintenance and annually thereafter.
B. CLEANING
Periodically clean the exterior of the device and wipe the lifeline using a damp cloth and mild detergent.
Towel dry.
C. STORAGE
Store in a clean, dry location when not in use. The lifeline should be fully retracted into the unit when not
in use.
FRONT I.D.LABEL
(FIG. A)
FALCON SELF–RETRACTING LIFELINE
WARNING: FAILURE TO OBSERVE INSTRUCTIONS
MAY RESULT IN SERIOUS OR FATAL INJURY
COMPLIANCE:
OSHA 1926.502, OSHA 1910.66, ANSI A10.14,
CSA Z259.2.2-98 (TYPE 2), ANSI Z359.1
MAX ARRESTING FORCE 900 LBS. (4 kN)
MAX ARREST DISTANCE 3' - 6" (1.06 m)
MAX CAPACITY 310 LBS. (140.6 kg)
LOAD-INDICATING SNAPHOOK WARNING:
REMOVE FROM SERVICE IF RED APPEARS
