OM-246 377 Page 15
SECTION 7
−
REPLACING THE GRINDING SHIELD OR
LENS COVERS
7-1. Replacing Grinding Shield On 9400i Helmet
Ref. 804 109
!
Never use the auto-dark-
ening lens without the in-
side and outside lens
covers properly installed.
Welding spatter will dam-
age the auto-darkening
lens and void the
warranty.
1
Grinding Shield
2
Retaining Clip
3
Tab
Rotate both retaining clips to the
Open position.
Gently push shield toward bot-
tom tab and remove shield from
helmet.
Remove retaining clips from
shield. Install clips in same loc-
ation on new shield. (Retaining
clips are not interchangeable.)
Install new shield in helmet and
rotate clips to the Lock position.
1
2
3
