Miller Bobcat 225 NT, Owner'S Manual

Page: 28 / 74

24
OM-405
7.3 Servicing Air Cleaner (Onan-Powered Units)
aircleaner3 1/97 – ST-156 852 / Ref. ST-183 175-A / S-0759
Stop engine.
Do not run engine without air
cleaner or with dirty element.
1 Wrapper (Foam Element)
Wash wrapper with soap and water
solution. Allow wrapper to air dry
completely.
Spread 1 tablespoon SAE 30 oil
evenly into wrapper. Squeeze out
excess oil.
2 Element
Replace element if dirty, oily, or
damaged.
1
2
7.4 Overload Protection (Onan-Powered Units)
ST-800 398-F / Ref. ST-183 175
Stop engine. Disconnect
negative (–) battery cable.
1 Fuse F1 (See Parts List)
F1 protects the exciter excitation
winding from overload. If F1 opens,
there is no/low weld and auxiliary
power output.
2 Fuse F6 (See Parts List)
F6 protects the engine wiring sys-
tem from overload. If F6 opens,
engine will not crank.
Replace any open fuses. Reinstall
cover before operating.
If any fuse continues to open,
contact Factory Authorized
Service Agent.
3/8 in
1
2
Tools Needed: