Complete Parts List is available at www.MillerWelds.com
OM-266621 Page 22
!
Always ground generator frame to
vehicle frame to prevent electric
shock and static electricity hazards.
!
Also see AWS Safety & Health Fact
Sheet No. 29, Grounding of Portable
And Vehicle Mounted Welding Gen-
erators.
!
Bed liners, shipping skids, and
some running gear insulate the
welding generator from the vehicle
frame. Always connect a ground
wire from the generator equipment
grounding terminal to bare metal on
the vehicle frame as shown.
!
Use GFCI protection when operat-
ing auxiliary equipment. If unit does
not have GFCI receptacles, use
GFCI-protected extension cord. Do
not use GFCI receptacles to power
life support equipment.
1
Equipment Grounding Terminal (On
Front Panel)
2
Grounding Cable (Not Supplied)
3
Metal Vehicle Frame
Connect cable from equipment ground
terminal to metal vehicle frame. Use #8
AWG or larger insulated copper wire.
Electrically bond generator frame to ve-
hicle frame by metal-to-metal contact.
5-2. Grounding Generator To Truck Or Trailer Frame
rot_grnd2 2014
−
11
−
800 652-D
1
3
2
GND/PE
5-3. Installing Exhaust Pipe
1/2 in.
Tools Needed:
Exhaust Pipe3 2010
−
04 / Ref 803 582
!
Stop engine and let cool.
Point exhaust pipe in desired di-
rection but always away from front
panel and direction of travel.
Summary of Contents for Big Blue 450 Duo CST
Page 18: ...OM 266621 Page 14...
Page 51: ...OM 266621 Page 47 247 963 D...
Page 61: ...Notes...
Page 62: ...Notes...