Miller 16 CB PLUS 1103 Operator'S Manual Download Page 15

Page: 15 / 16

The CiNX Fluid head can be stored for extended periods; Miller

recommends storage in a Miller Case and the following:

•  Remove battery.
•  Clean the external surfaces.
•  Keep in a dry place away from direct sunlight.

• Loosen off PAN & TILT LOCK.

Spare Parts and Accessories

ITEM

ITEM NO.

Battery

P3798

Camera screw 3/8”

P0037

Camera Plate (Arri Type)

1065

Additional Pan Handle HD Telescopic With Clamp

698

Additional Pan Handle Articulated With Extender

1230

Accessory Serrated Handle Clamp Extender

1238

Accessory Mounting Block (AX)

1260

Mitchell base adaptor with Clamp Nut

1225

D100 Claw Ball Level (includes Clamp Nut)

1290

Clamp Nut (to suit D100mm Bowl)

PN10223

D150 Claw Ball Level (includes Clamp Nut)

1295

Miller Head Case CiNX (suit D100 Bowl)

3602

3/8” x 1” Countersunk Socket Screw

PN10456

Warranty

Please refer to warranty card for complete details.

Miller Authorised Service Agents must carry out all service and

repair work. Failure to observe this requirement may void war-

ranty. It is advisable to notify Miller or a Miller Authorised. Service

Agent if a change of performance is observed as a result of drop-

ping or rough usage. For information regarding sales and service

of Miller products or for your nearest Miller representative please
contact us via our website or at the following:

MILLER CAMERA SUPPORT EQUIPMENT

30 Hotham Parade
Artarmon, Sydney, NSW 2064 Australia

P +61 2 9439 6377
F +61 2 9438 2819

[email protected]

MILLER Camera Support (LLC) USA

216 Little Falls Road (Unit 15 & 16),
Cedar Grove, New Jersey 07009 USA

P +1 (973) 857 8300
F +1 (973) 857 8188

[email protected]

MILLER FLUID HEADS (EUROPE) LTD.

12A, Shepperton Business Park
Govett Avenue, Shepperton
Middlesex, TW17 8BA
United Kingdom

P +44 (0) 1932 222 888
F +44 (0) 1932 222 211

[email protected]

millertripods.com

Storage

Service, Sales and Support

Summary of Contents for 16 CB PLUS 1103

















Search results

Summary of Contents for 16 CB PLUS 1103

Reviews:

Related manuals for 16 CB PLUS 1103

Brands by name

Popular brands

Miller 16 CB PLUS 1103, Operator'S Manual

Search results

Summary of Contents for 16 CB PLUS 1103

Reviews:

Related manuals for 16 CB PLUS 1103

Brands by name

Popular brands