Miller Electric MARK VIII-2, Owner'S Manual

Page: 25 / 44

OM-218 Page 21
Ref. ST-174 143
1 Remote Amperage Control
Switch
For front panel control of a module,
place switch on that module in Off
position.
For remote control, place switch in
On position. See Example below.
2
Amperage Adjustment Control
Use control at each module to
select weld amperage for that mod-
ule. The numbers are weld
amperes.
3
Remote Hand Control
Example Of Combination Remote Amperage Control
Set Switch Adjust Remote Control Set Desired Maximum Amperage
Min (35 A)
Max (125 A)
Control can be adjusted
while welding.
3
1
2
5-2. Amperage Adjustment Controls
60 Hz Model Shown
1 Pilot Light
2 Power On Push Button
Press button to turn unit, pilot light,
and fan motors On.
3
Power Off Push Button
Press button to turn unit, pilot light,
and fan motors Off.
1
2
3
5-3. Power Switch Push Buttons And Pilot Light