OM-6618 Page 4
3. Assembly Of Flat Terrain Running Gear With Protective Cage (195 366)
803 928
−
D
Assembly:
Assemble casters and caster mounting
bracket.
Assemble base rails, axle, and wheels
(valve stems out).
.
Install onto generator using mounting
hole 3 in rails. Adjust to achieve proper
balance for application and accesso-
ries.
Install caster mounting bracket onto base
rails.
Mount handles. Do not tighten hardware.
Install side rails and tighten all hardware.
Install cable holders.
Description (Qty)
Part
No.
Item
No.
1
220260
Rail, Side (2)
2
108940
Screw, 250
−
20 x .75 Hexwhd.61d Gr5 Pld (8)
3
220266
Assy, Cable Holder (4)
4
220263
Assy, Handle Running Gear (2)
5
601965
Screw, 375
−
16 x 1.00 Hex Hd
−
pln Gr5 Pld (12)
6
220259
Rail, Base Support Rh (1)
7
167788
Nut, 375
−
16 .56hex .34h Stl Pld Sem Cone Wshr .88d (12)
8
220257
Axle, Wheel (Large) (1)
9
220710
Wheel, Rbr Tire 14.500 Od X 4.750 Wide X .750 Bore (2)
10 121614
Ring, Rtng Ext .750 Shaft X .085 Thk E Style Pld (2)
11 108940
Screw, 250
−
20 x .75 Hexwhd .61d Gr5 Pld (4)
12 220267
Bracket, Mtg Caster (1)
13 168247
Caster, Swvl 5.00 In Rubber X 2.000 In Wide (2)
14 220258
Rail, Base Support Lh (1)
15 604224
Screw, 250
−
20 x .75 Hexwhd .50d Stl Pld Slffmg Tap
−
rw (8)
16 111998
Pin, Cotter Hair .120 Dia X 2.375lg X .500 Shaft (4)
17 152461
Nut, 250
−
20 .44hex .23h Stl Pld Sem Cone Wshr .65d (8)
18 602250
Washer, Flat .812id x 1.469od x .134t Stl Pld Ansi .750 (2)
Be sure to provide model when
ordering replacement parts.
Tools Needed:
7/16, 9/16 in
3/8, 9/16 in
1
2
3
4
5
15
16
17
14
7
5
13
12
11
10
9
8
7
6
18
Remove and
discard exist-
ing hardware
before instal-
ling handle.
Remove
paint from
axle grooves
before instal-
ling retaining
rings.
⇓
