- 11 of 35 -
lead to inaccurate readings.
2. The upper end of the unit should be located about 5mm to
10mm away from the palm base line and the centerline of the
unit should be in line with the middle finger as shown in the
figure.
Avoid capitulum ulnae (wrist
tuberositas ulnae bone) wrapped in
the wrist cuff.
3. Pull up the flap of the Wrist Holder
and roll to fasten it as illustrated, neither
leaving any space between the Wrist
Holder and your wrist nor tightening it
too much so as to feel discomfort.
4. If the wrist is thick, do not fasten the
wrist holder too hard avoid the distortion of the wrist holder.
Otherwise, it will affect the measurement.
