Page 5 of 9 rev 100321 Millennia Media NSEQ
NSEQ Controls
NSEQ-2 Front Panel
1.
Band In/Out Switch "IN"
—
places its associated
EQ band in circuit or out of circuit
2.
Frequency Select Switch
—
selects fixed high and
low band frequencies
3.
Peak/Shelf Select
—
When LED is on, EQ is
shelving at 6 dB per octave. When LED is off, EQ is
peaking with a fixed "Q" of 1.0.
4.
Boost/Cut Control
—
+18 dB of boost and -18 dB
of cut. Boost/Cut potentiometer has 21 detented
positions for accurate repeatability and session log-
ging.
5.
Parametric Frequency Control
–
selects EQ center
frequency.
6.
Parametric Frequency Range Select Switch
"10X"
—
When LED is on, frequencies as shown on
front panel legend are multiplied by 10X. When LED
is off, frequencies are as shown on front panel
legend.
7.
Parametric Q Control
–
EQ bandwidth.
8.
Master Equalizer In/Out Select Switch
—
"EQ
IN
"
places EQ in the signal path. Hardwired relay
bypass when out.
9.
Twin Topology
—
Select J-FET (LED illuminated) or
Vacuum Tube circuitry.
10.
Gain Range
—
+/- 18dB or +/- 9dB
11.
Power Indicator
—
when illuminated shows the
NSEQ-2 is powered up and active.
12.
Power Switch
—
turns power on and off.
NSEQ-4 Front Panel
1.
Band In/Out Switch "IN"
—
places its associated
EQ band in circuit or out of circuit
2.
Frequency Select Switch
—
selects fixed high and
low band frequencies
3.
Peak/Shelf Select
—
When LED is on, EQ is
shelving at 6 dB per octave. When LED is off, EQ is
peaking with a fixed "Q" of 1.0.
4.
Boost/Cut Control
—
+18 dB of boost and -18 dB
of cut. Boost/Cut potentiometer has 21 detented
positions for accurate repeatability and session log-
ging.
5.
Parametric Frequency Control
–
selects EQ center
frequency.
6.
Parametric Frequency Range Select Switch
"10X"
—
When LED is on, frequencies as shown on
front panel legend are multiplied by 10X. When LED
is off, frequencies are as shown on front panel
legend.
7.
Parametric Q Control
–
EQ bandwidth.
8.
Master Equalizer In/Out Select Switch
—
"EQ
IN
"
places EQ in the signal path. Hardwired relay
bypass when out.
9.
Balanced/Unbalanced Input
—
Unbalanced
increases gain by 6dB to compensate for possible
signal loss when balanced and unbalanced
equipment is used in the same signal path.
10.
Gain Range
—
+/- 18dB or +/- 9dB
11.
Power Indicator
—
when illuminated shows the
NSEQ-4 is powered up and active.
12.
Power Switch
—
turns power on and off.
6
1
8
1
2
