C-3
6.
The Operating Switchbox (toggle switch) controls the action of the apron; this switch may be located
with the operator at the towing vehicle for ease of use. After the engine has started, flip the operating
switch to start the action of the apron in the topdresser (which moves the material towards the beater at
the rear of the unit).
7.
Observe the spreading application and determine if adjustments are required. If adjustments are
desired, please refer to the information for
Adjusting the TURF TIGER
provided in the Millcreek
Operator's Manual.
The variables affecting the application rate are (a) towing vehicle ground
speed and (b) metering gate opening.
8.
When the topdresser box is empty, stop the apron by flipping the switch in the opposite direction.
9.
Turn the engine off by moving the throttle lever to the MIN. position and turning the engine switch to the
OFF position. Turn the fuel valve lever to the OFF position.
10.
Refer to
Section 4
in the
Millcreek Operator's Manual
for maintenance to be performed following
operation of the topdresser. Likewise, refer also to the
Engine Owner's Manual
for instructions
pertaining to the periodic maintenance of the engine.
allow accumulated sand to dislodge
from the apron chain. Failure to do so will result
in extreme tension in the chain, which may cause serious damage to the unit.
Operating the Model 3100 Engine Drive Topdresser (continued)
Summary of Contents for TURF TIGER 3100
