Millcreek TURF TIGER 3100, Operator'S Manual

Page: 11 / 54

Operator's Manual: Millcreek 3100/3200 TURF TIGER
®
Spreaders
1-5
Inspection and Warranty Registration
Most spreader models are shipped from your Millcreek Dealer completely assembled and ready for operation.
Inspect your new spreader thoroughly upon receipt to ensure that it has been shipped to you in a satisfactory
manner. Immediately notify the freight company and your Millcreek dealer in case of shipping damage,
shortage(s), and/or errors.
The TURF TIGER Spreader is supplied with the following operating features/components (standard):
• Adjustable Metering Gate
• Loading Flares
• PTO Shaft
• Jack
• 26.5 x 14 x 12 (4-ply) Turf Tires
NOTE: If the spreader has not been pre-assembled, please refer to the Supplemental Assembly
Instructions. Please contact your local Millcreek Dealer for assistance as needed.
Your spreader shipment may also include the following options:
• Safety Chain
• Slow Moving Vehicle Sign
• Pathmaker
• Engine Drive*
Instructions for assembling these items are provided in Appendix B and C at the back of this manual. Please
contact your local Millcreek Dealer for assistance as needed.
*NOTE: If you ordered a Model 3100 Engine Drive , please also refer to the Supplemental Instructions,
Millcreek Part #43837 , for additional important information about the operation of that unit.
Following inspection of your new spreader, locate the Millcreek Warranty Card in the literature packet
shipped with your spreader. For proper warranty registration, Millcreek requires that you fill out the warranty
registration card and return it
within 30 days to:
MILLCREEK WARRANTY REGISTRATION
Millcreek Manufacturing Company
34 Zimmerman Road
Leola, PA 17540
For your safety, be sure to locate all safety decals and review their content before proceeding with
operating the spreader.