Millcreek 57G, Operator'S Manual

Page: 11 / 38

Operator's Manual: Millcreek 57G & 77G Ground Drive Spreaders
1-5
Inspection and Warranty Registration
Most spreader models are shipped from your Millcreek Dealer completely assembled and ready for operation.
Inspect your new spreader thoroughly upon receipt to ensure that it has been shipped to you in a satisfactory
manner. Immediately notify the freight company and your Millcreek dealer in case of shipping damage,
shortage(s), and/or errors.
NOTE: If the spreader has not been pre-assembled, please refer to the Supplemental Assembly
Instructions. Please contact your local Millcreek Dealer for assistance as needed. If you ordered an
optional endgate and/or optional fines pan with your spreader, you may also have to assemble these
components on your spreader; refer to the Assembly Instructions sheet and/or Appendix B at the back of
this manual for the corresponding parts drawings.
Following inspection of your new spreader, locate the Millcreek Warranty Card in the literature packet shipped
with your spreader. For proper warranty registration, Millcreek requires that you fill out the warranty registra-
tion card and return it
within 30 days to:
MILLCREEK WARRANTY REGISTRATION
Millcreek Manufacturing Company
34 Zimmerman Road
Leola, PA 17540
For your safety, be sure to locate all safety decals and review their content before proceeding with
operating the spreader.