Milky 17591, Operating Instruction

Page: 3 / 14

15
15
GENERAL SAFETY RECOMMENDATIONS
BEFORE ANY INSTALLATION, READ THIS MANUAL VERY CAREFULLY.
MAKE SURE, THAT YOU HAVE CLOSED TOP BOWL FIXING NUT TIGHTLY.
VOR DER REINIGUNG DES GERÄTES, IMMER DEN STECKER AUS DER STECKDOSE
ZIEHEN.
DON’T REPAIR THE DEVICE BY YOURSELF, IN CASE OF MALFUNCTION RATHER
CALL AUTHORIZED SERVICE PROVIDED BY YOUR DISTRIBUTOR.
IN CASE OF SERIOUS MALFUNCTIONS, UNPLUG THE DEVICE FROM MAINS AND
CALL AUTHORIZED SERVICE.
PROTECT THE UNIT FOR MOISTURE AND WATER.
IN CASE, THAT THE DEVICE IS NOT FUNCTIONING PROPERLY, EVEN YOU HAVE
EXACTLY FOLLOWED INSTRUCTIONS DESCRIBED IN THIS MANUAL, YOU ARE
ALLOWED TO USE ONLY THOSE PROCEDURES, WHICH ARE ALLOWED BY THE
USER MANUAL. USE OF ANY OTHER PROCEDURES OR ADJUSTMENTS COULD
RESULT IN DEVICE DESTRUCTION OR LONGER SERVICE TIME. INJURIES CONNEC-
TED WITH SUCH PROCEDURES CANNOT BE MATTER OF ANY PRODUCT LIABILITY
CLAIMS.
TAKE CARE THAT WATER OR HUMIDITY WILL NOT COME INTO THE DEVICE, ESPE-
CIALLY BY CLEANING PROCEDURES.N.
THE MOTOR OF THE SEPARATOR ALWAYS HAS TO BE SWITCHED ON FOR ABOUT
3 MINUTES BEFORE STARTING THE SEPARATION, OTHERWISE THE RESULT IS
INCORRECT SEPARATING.
THE SUSPENSION SYSTEM OF THE MOTOR IS THE FLOATING TYPE. THEREFORE,
DO NOT BE SURPRISED IF BY TOUCHING THE MOTOR SHAFT CERTAIN MOBILITY
IS NOTICED. IT SHOULD NEVER BE RIGID. THE TOP BOWL IS SITUATED RIGHT AT
THE CENTER OF THE MACHINE AND AT A GOOD HEIGHT. THE SUSPENSION CAN
BE ADJUSTED BUT SHOULD NOT BE MODIFIED UNDER ANY CIRCUMSTANCES.
THE ENGINE SPEED IS ALWAYS SET TO THE MAXIMUM ROUNDS PER MINUTE
(RPM) OF 7500. ONLY WHEN THIS RPM IS REACHED, IT IS POSSIBLE TO ADJUST
THE SPEED BETWEEN 6000 AND 7500 RPM.