Milky 17582-115-4, Operating Instruction

Page: 3 / 13

15
15 15
GENERAL SAFETY RECOMMENDATIONS
BEFORE ANY INSTALLATION, READ THIS MANUAL VERY CAREFULLY.
MAKE SURE, THAT YOU HAVE CLOSED TOP BOWL FIXING NUT TIGHTLY.
DISCONNECT DEVICE FROM MAINS BEFORE CLEANING.
DON’T REPAIR THE DEVICE BY YOURSELF, IN CASE OF MALFUNCTION RATHER
CALL AUTHORIZED SERVICE PROVIDED BY YOUR DISTRIBUTOR.
IN CASE OF SERIOUS MALFUNCTIONS, UNPLUG THE DEVICE FROM MAINS AND
CALL AUTHORIZED SERVICE.
PROTECT THE UNIT FOR MOISTURE AND WATER
IN CASE, THAT THE DEVICE IS NOT FUNCTIONING PROPERLY, EVEN YOU HAVE
EXACTLY FOLLOWED INSTRUCTIONS DESCRIBED IN THIS MANUAL, YOU ARE
ALLOWED TO USE ONLY THOSE PROCEDURES, WHICH ARE ALLOWED BY THE
USER MANUAL. USE OF ANY OTHER PROCEDURES OR ADJUSTMENTS COULD
RESULT IN DEVICE DESTRUCTION OR LONGER SERVICE TIME. INJURIES CONNEC-
TED WITH SUCH PROCEDURES CANNOT BE MATTER OF ANY PRODUCT LIABILITY
CLAIMS.
We are happy that you have decided to buy our cream separator.
We guarantee, that with the right use and application the cream separator will work
properly.
TAKE CARE THAT WATER OR HUMIDITY WILL NOT COME INTO THE DEVICE, ESPE-
CIALLY BY CLEANING PROCEDURES.
THE MOTOR OF THE SEPARATOR ALWAYS HAS TO BE SWITCHED ON FOR ABOUT
3 MINUTES BEFORE STARTING THE SEPARATION, OTHERWISE THE RESULT IS
INCORRECT SEPARATING.
THE SUSPENSION SYSTEM OF THE MOTOR IS THE FLOATING TYPE. THEREFORE,
DO NOT BE SURPRISED IF BY TOUCHING THE MOTOR SHAFT CERTAIN MOBILITY
IS NOTICED. IT SHOULD NEVER BE RIGID. THE TOP BOWL IS SITUATED RIGHT AT
THE CENTER OF THE MACHINE AND AT A GOOD HEIGHT. THE SUSPENSION CAN
BE ADJUSTED BUT SHOULD NOT BE MODIFIED UNDER ANY CIRCUMSTANCES.
IN PRACTICE THE ONLY MAINTENANCE OF CREAM SEPARATOR IS CHANGING
THE CARBON BRUSHES, WHICH SHOULD BE REPLACED BY AUTHORIZED SERVICE
BEFORE THEY ARE COMPLETELY WORN OUT. CHECK THE CARBON BRUSHES
WHEN THE MOTOR STARTS RUNNING SLOWER OR IS NOT RUNNING SMOOTHLY
OR STOPS.