HDMI/IR/RS232 Twisted Pair POC Extender
2
2. Product Appearance
2.1 MPTP-T100T
Figure 1 Interfaces of MPTP-T100T
No.
Name
Description
①
On
Link
In
Power
On: Used to show the working status, blinks when in normal
working state, turns off when stop working.
Link: Twisted Pair Link status indicator. It will keep on when
connection is successful.
In: When connected with device which supports HDCP and
works normally, this LED will keep on. If the device does not
support HDCP, the LED will blink.
Power: Turns red and keep on when power on.
②
ETHERNET
Ethenet ports, when need to work in a local area network, one
of these 4 ports (both the Ethernet ports of MPTP-T100T and
MPTP-T100R) should be used for internet access, and the
others can be connected with computers. If they are well
connected, the yellow LED indicators on the corresponding
ports will keep blink and the green ones will keep on when
working.
③
HDBT OUT
To connect with the HDBT IN port of MPTP-T100R by using a
single CAT5e cable (90m length in max).
④
HDMI IN
HDMI input port, connect with an HDMI source device.
⑤
IR IN&OUT
IN: Connect with IR receiver, the IR signal received from this
port can only send out in MPTP-T100R.
OUT: Connect with IR Emitter, and the sending IR signal is
received from MPTP-T100R.
⑥
RS232
Serial port, 3p captive screw connector, connect with the
control terminal to control the controlled terminal, supports
bi-directional RS232 control between MPTP-T100T and
MPTP-T100R.
⑦
DC 24V
Connect with a DC 24V power adapter. (Not necessary if
MPTP-T100R connects with power adapter)
Note:
Pictures shown on this manual are for reference only, different model and
specifications are subject to real product.
1
2
3
4
5
6
7
