4K HDBaseT 8x8 Matrix Switcher
22
Command
Function
Feedback Example
%9978.
Check the HDCP compliant status of the
inputs.
In 1 2 3 4
HDCPEN Y Y Y Y
In 5 6 7 8
HDCPEN Y Y Y Y
4.3.5 Control through 9-pin RS232 port
Connect a control device to the 9-pin RS232 port of the switcher, users are able to
control the switcher& far-end device. See the figure below:
Control the switcher& 3rd-party Device through 9 pin female RS232 port
Control the switcher: send RS232 commands directly
Control 3
rd
party: send command:
“
/+[Y]/[X]:******.
” (Refer to for detailed
information.)
4.3.6 Control through 3-pin RS232 port
Connect the RS232 (3-pin pluggable terminal block) port in any zone to PC, and
connect the controlled RS232 device (3rd party device) to the corresponding (same
zone as PC) receiver, see below:
HDMI OUT
HDBT IN
Tx
Rx
RS232
IR IN
IR OUT
PoC
MPTP-T70R
3rd party
PC
