Compact Scaler Switcher
5
3.2 System Diagram
3.3 Connection Procedure
Step1.
Connect HDMI source devices (e.g. Blue-ray DVD) to HDMI input ports of
MP-SC-5D with HDMI cable. Connect VGA source devices (e.g. PC) to VGA
input ports of MP-SC-5D with VGA cable.
Step2.
Connect the corresponding audio source to the corresponding AUDIO INPUT
port of MP-SC-5D with audio cable accordingly. The audio of HDMI can be set as
embedded or external by sending right commands.
Step3.
Connect a HDMI display device to HDMI output port of MP-SC-5D with HDMI
cable.
Step4.
Connect speakers, headphones or amplifiers to AUDIO OUTPUT port of
MP-SC-5D.
Step5.
Connect control device (e.g. PC) to the RS232 port of MP-SC-5D.
Step6.
Select MIC level and connect right microphone to the MIC input port. MIC audio
will be transmitted to AUDIO OUTPUT port and mixed with source audio.
Step7.
Connect DC12V power adaptor to the power port.
3.4 Connection of Microphone
MP-SC-5D provides one 3-level microphone input to accommodate different microphone
input modes, including 48V phantom power mode, MIC mode & LINE mode.
48V phantom power input
When switch to “48V” (It has a good frequency characteristic, high input impedance and
high sensitivity in this mode), the MIC input will offer a 48V phantom power. This is only
used for
condenser microphone
.
Connect the microphone this way
: “+” connects to positive, “-” connects to negative and
DVD
Rs232
control panel
PC
HDTV
DV Camera
PC
Laptop
MIC
Projector
