Compact Scaler Switcher
11
4.3 Operations of CEC Function
MP-SC-5D supports CEC and CEC standby functions, and can be enabled/ disabled
through RS232 commands or OSD menu. If the HDMI source device supports CEC and
its CEC is on, and when MP-SC-5D enter in standby/startup mode, then source device
will automatically enter in standby/startup mode.
And due to CEC function, user can control HDMI source device with basic operations
(play, pause, fast forward, fast reverse, menu etc.). So user is able to control MP-SC-5D
and HDMI source device via the IR remote of MP-SC-5D.
Commands for CEC function:
“50686%” (enable CEC) and “50687%” (disable CEC).
The working status related to CEC and STANDBY is showed as below:
Situation
Working Status
CEC: on, Standby: on
Press STANDBY button on IR remote, MP-SC-5D enters in
standby mode, so do all HDMI source devices.
Press STANDBY button again on IR remote, MP-SC-5D exits
standby mode, only the HDMI source device switched to
starts working.
CEC: on, Standby: off
Press STANDBY button on IR remote, MP-SC-5D enters in
standby mode, HDMI 1~3 source devices keep on.
CEC: on
Use CEC function buttons,
▲
,
▼
,
,
and
OK
buttons on
IR remote to control HDMI source devices, include play,
pause, fast forward, fast reverse and operations in menu.
CEC: off
Unable to control HDMI source devices through IR remote.
CEC: Control HDMI source devices by IR remote of MP-SC-5D
4.4 Operations of RS232 Control
MP-SC-5D can be controlled by sending RS232 commands. Connect the RS232 port of
