Milestone pro MP-MUH2-42T, User Manual, Page: 31 / 41

4x2 Matrix Switcher
28
Command Description
Command Example and
Feedback
<SignalDetMode TMDS
<SignalDetMode 5V
>GetSignalDet Get the input signal detection method.
<SignalDetMode TMDS
<SignalDetMode 5V
>Set5VSource [param1]
In auto switching mode, set the detection
method of HDBT inputs to detect the
signal of transmitter to ensure different
transmitters can be used.
[param1] = HW, FW.
HW - Hardware detection.
FW - Firmware detection.
>Set5VSource HW
>Set5VSource FW
<HDBTIN5VSourceFrom
HW
<HDBTIN5VSourceFrom
FW
>Get5VSource
Get the detection method of HDBT inputs
to detect the signal of transmitter to
ensure different transmitters can be used.
<HDBTIN5VSourceFrom
HW
<HDBTIN5VSourceFrom
FW
>SetDownScaler [param1]
[param2]
Set the down-scaling function of output
[param1].
[param1] = OutA, OutB.
[param1] = Null, all outputs.
[param2] = En, Dis.
En - Enable down-scaling function.
Dis - Disable down-scaling function.
>SetDownScaler En
>SetDownScaler Dis
<DownScaler True
<DownScaler False
>GetDownScaler [param1]
Get the down-scaling function setting
status of output [param1].
[param1] = OutA, OutB.
[param1] = Null, all outputs.
>GetDownScaler
<DownScaler True
<DownScaler False
>SetDhcp [param1]
Enable/disable DHCP (Dynamic Host
Configuration Protocol).
[param1] = En, Dis.
En - Enable DHCP.
Dis - Disable DHCP.
>SetDhcp En
>SetDhcp Dis
<Dhcp True
<Dhcp False
>GetDhcp Get DHCP status.
<Dhcp True
<Dhcp False
>SetIpAddr
[param1].[param2].[param
3].[param4]
Set GUI IP.
[param1] = 0 ~ 255.
[param2] = 0 ~ 255.
[param3] = 0 ~ 255.
[param4] = 0 ~ 255.
>SetIpAddr 192.168.0.178
<SetIpAddr 192.168.0.178