4x2 Matrix Switcher
25
8.1.3 RS232 Pass-through Between Matrix Switcher and Receiver
1) To control local third-party device from remote receiver location, first determine
which HDBaseT receiver is connected to. Next, connect a PC to the RS232 port of
HDBaseT receiver, then connect a third-party device (e.g. projector) to the RS232
port of matrix switcher, the connection diagram is shown as below:
2) To control remote third-party device from local matrix switcher location, first
determine which HDBaseT receiver is connected to. Next, connect a PC to the
RS232 port of matrix switcher, then connect a third-party device (e.g. projector) to
the RS232 port of HDBaseT receiver, the connection diagram is shown as below:
