13
5. Network Configuration
This chapter explains how to connect UR32 to network via WAN connection or cellular.
5.1 Ethernet WAN Configuration
A. Go to “Network > Interface > Port” to change LAN1 to WAN port.
B. Go to “Network > Interface > WAN” to select connection type and configure WAN parameters, click
“Save & Apply” button to make the changes take effect.
C. Connect WAN port to another network devices like modem.
D. Go to “Network > Interface > Link Failover” to rise the WAN priority to 1.
E. Open your preferred browser on PC, then type any available web address into address bar and see if it
is able to visit Internet via UR32 router.
