70
Alarm Setting
Record Video Sections:
Six different periods are available(5, 10, 15, 20, 25, 30
sec)
Pre-record:
Reserve the record time before alarm, 0~10 sec
Snapshot:
The number of snapshot, 1~5
Snapshot Interval:
This cannot be edited unless you choose more than 1 to
Snapshot
External Output Action Time:
Length of time an alarm lasts, this cannot be edited
unless when you enable the External Output on the Alarm Action firstly
Audio Action Settings:
Set the audio schedule to trigger different audio files and
action times in different time, which is corresponded to alarm action
Play Audio Interval:
Auto/ 10 seconds/ 30 seconds/ 1 minute/ 5 minutes/ 10
minutes are available
External Output
Please set the
Normal Status
firstly, when the
Current Status
is different with
Normal Status
, it will
lead to the alarm.
4.5.2 Storage
Before you start:
To configure record settings, please make sure that you have the network storage device within the
network or the SD card inserted in your camera.
Choose the storage mode according to your needs.
Storage Management
SD Card:
Table 4-5-5 Description of the buttons
Parameters
Function Introduction
Format
Format SD card, the files in SD card will be removed
