1
4005530-04
©2022, Miles Industries Ltd.
Kit Contents
1 Wall Switch
4 Screws
1 Battery Holder
1 Plate with magnets
1 Battery Cover assembly
1 Harness assembly - 35 ft
1 Junction Box
1 Cover plate and Screws
1 Cable tie
This kit must be installed or serviced by a
qualified installer, service agency or gas
supplier. These instructions are to be
used
in conjunction with the main installation
instructions for the above listed heater
models.
If this kit is to be used on a Valor fireplace
installed outdoor, the position and
mounting of this assembly must be in
a sheltered place protected from the
elements (dry location).
The Remote Battery and Wall Switch Kit (RBWSK)
makes the fireplace batteries more accessible while
consolidating their location with the wall switch.
The batteries of the RBWSK are connected to the
fireplace receiver and therefore, no batteries are
necessary in the receiver or battery box.
Remote Battery and Wall Switch Kit RBWSK
Approved for use with Valor heater models using GV60 control system ONLY
INSTALLATION MANUAL
RBWSK
