2
Fan Kits Components
The complete 795CFKV2 kit contains the
following:
•
Fan enclosure: fan and motor unit,
control wire;
•
Fan control module;
•
Wiring diagram label;
•
6-foot power cord.
Kit 795CFKV2 (as supplied)
Install the fan
We highly recommend to install this fan (blower) kit
to the appliance before installing the appliance in the
fi replace cavity. Otherwise, the appliance must be
disconnected and taken out of the cavity completely as
the fan can only be fi tted from the rear.
NOTE:
The fan box adds 3 inches to the depth of the
appliance.
1.
Fit the fan to the appliance.
a) On the back of the appliance, remove the sheet
metal plate (9 screws) and discard it.
b) Apply the self-adhesive wiring diagram label
provided at the back of the fan enclosure as
shown.
6-foot
electrical cord
Fan control wire
(module to receiver)
Wiring diagram
Fan control module
Fan enclosure
c) Remove the left side valve access panel (5
screws).
d) Unpack the fan contents. From the back of the
appliance, route the fan control wire from the fan
control module to the remote receiver inside the
appliance case’s left side.
e) Insert the bottom edge of the fan enclosure
inside the edge of the appliance box. Secure the
fan box with the screws removed in 1 (9 screws).