8
5
1. UNIT
2. HALF SLEEVE
3. HEX NUT
4. LOCK WASHER
5. PLAIN WASHER
6. BODY
7. REAR SUPPORT STRAP
8. TAPPING SCREW
9. M5 HEX BOLT
3
5
2
1
4
6
8
HEX
Lock Washer
Plain Washer
7
Accessories subject to change without notice.
1. Fuse replacement
If the fuse blows, check the power connection and replace the fuse. If the fuse blows again after
the replacement, there may be an internal malfunction. In this case, consult your nearest dealer.
2. Warning
Use the specified amperage fuse for each lead.
Use of a higher amperage fuse may cause serious damage.
Supporting the unit
3
9
7
When SEL button is pressed over 2 seconds to enter it’s second menu as below:
By pressing the button again, the unit will be in I- VOL mode. (Initial Volume Level
Adjustment). You can adjust the I-Vol by turning the spindle knob. After the setting of
initial levels, when the unit is powered on/off, detach on/off, and ACC on/off, if the
present level is lower than initial level, it will keep the present level. And if the present
level is higher than initial level, it will be automatically adjusted to the preset level.
By pressing SEL button again, the unit will be in Area Selection mode. Use the spindle
knob to choose USA or EUR (Europe).
On the beep 2nd, you can control the beep on or beep 2nd by turning the spindle knob.
Beep on : You can hear "beep" sound when you press all buttons.
Beep 2nd : You can hear "beep" sound when you press the button over 1.5 secs.
On the Clock feature, you can adjust the clock by turning the spindle knob. Turn VOL
knob clockwise to adjust minute; turn VOL knob counter clockwise to adjust the hour.
After adjustment, simply press SEL button to confirm.
On the Loud feature, you can select Loud On or Off by turning the spindle knob.
- Loud ON: To emphasize the bass and the treble at low volume in any mode.
Turn the spindle knob (2) left or right to decrease or increase the volume level. Switching on
your radio automatically allows you to set the volume level without having to select it first.
Simply turn the spindle knob to set the desired level.
Press this button to select radio, USB and AUX IN.
In Radio mode, pressing the BD/FN button (5) will shift FM/AM bands:
FM1 – > FM2 --> FM3 --> AM.
In USB mode, repeatedly short push to display ID3 information.
In any mode, press and hold TF button (5) for 2 seconds to show the clock.
2) I-Vol, Area, Beep, Clock, Loud Selection
a. I-VOL (Initial Volume Level)
b. AREA Selection
c. BEEP 2ND
-
-
d. CLOCK Adjustment
e. LOUD Selection
3. Volume control (spindle knob 2)
4. MODE Button (3)
5. BD/TF button (4)
Controls (continued)
BEEP
Long
push
Short
push
I-VOL
Short
push
AREA
CLK
Short
push
LOUD
Short
push
