82
InstructIon Manual
Cotterless Crank Replacement:
1 . Replace the crank arm onto the axle.
2 . tap the crank arm lightly with a mallet.
3 . Refit the washer and tighten flange nut or bolt securely to a torque of 27Nm.
4 . Replace the dust cover.
1 . Remove dust cap.
2 . tap the crank arm lightly with a mallet.
3 . Re-tighten the flange nuts, and refit the dust caps.
New cotterless cranks may become loose with initial use.
Perform the following task after several hours riding, and repeat it two or three
times after further use. Cranks should then remain tight.
Detailed maintenance
Screw in the removal tool.
Turn the screw bolt
clockwise.
Position the crank on the axle.
Lightly tap the crank
onto the axle.
Tighten the flange nut.
Replace the dust cap.
