MiLAN MIL-SME801GLX User Manual Download Page 44

Page: 44 / 155

PVID (Port VID):

Set the port VLAN ID that will be assigned to untagged

traffic on a given port. This feature is useful for accommodating devices that

you want to participate in the VLAN, but don’t support tagging. Only one

untagged VLAN is allowed per port. Other VLANs need to be tagged.

Ingress Filter 1:

If this is set, the port will only forward packets with VID

(VLAN ID) matching this port’s configured VID. Press the

Space

key to

choose forward or drop the frame with the VID not matching this port’s

configured VID.

Ingress Filter 2:

Drop untagged frame. Press the

Space

key to choose drop

or forward the untagged frame.

Actions->

<Edit>:

Configures all items. When finished, pressing

ESC

returns to the

action menu line.

<Save>:

Saves all configured values.

<Quit>:

Exits this page and returns to previous menu.

Summary of Contents for MIL-SME801GLX




























































































































































Search results

Summary of Contents for MIL-SME801GLX

Reviews:

Related manuals for MIL-SME801GLX

Brands by name

Popular brands

MiLAN MIL-SME801GLX, User Manual

Search results

Summary of Contents for MIL-SME801GLX

Reviews:

Related manuals for MIL-SME801GLX

Brands by name

Popular brands