Bass enhancement
To increase/decrease the bass level press the BASS (B) +/- button repeatedly.
NOTE: The BASS levels range from -3 to +3.
Mute
Pressing the MUTE button on the remote control will temporarily silence the audio output. You will see
‘MUTE’
flash on the display to indicate that the mute function is active.
Sleep timer
The unit can be set to enter STANDBY mode after a period of time
1.
During playback mode, press the SLEEP button on your remote control to enter the timer
settings.
2.
Press the SLEEP button repeatedly to cycle through the available time duration options of: 5, 10,
15, 30, 45, 60, 90 minutes and OFF.
3.
When you have selected the required timer duration, just leave all buttons untouched for 2
seconds and the timer will begin the countdown.
4.
When the time elapses, the STANDBY mode will be activated.
Adjusting the display brightness
Press the DIM button from your remote control repeatedly to cycle through the 3 brightness states
LOW, MED & HIGH.
Connecting a Bluetooth device
Before you can use the Sound Bar with your phone or other BT capable device, you will need to pair the
Device to the Sound Bar.
NFC Compatible Smart Phone
Touch the NFC-Mark on the unit with the Smart Phone.
1.
Touch and hold until the smart phone responds. If prompted for a confirmation, enter ’yes’ or
’confirm’.
2.
To remove the pairing, touch the NFC-Mark again.
Summary of Contents for climax 2.1
Page 1: ...MILAN CLIMAX 2 1 CHANNEL SOUND BAR WITH HDMI USER MANUAL...
Page 17: ......
