NOTE: You may need to activate PCM (Downmix) on your source devices such as TV, DVD or Blu-ray
player.
Figure 6: Connection to a TV using an RCA -3.5mm audio cable
1.
You need to use a 3.5mm to RCA Cable.
2.
Connect the 3.5mm end of the cable to your TV headphone jack (3.5mm audio output).
3.
Connect the other RED & WHITE ends to the TV inputs on the side of the Sound Bar (9), taking
care to match the RED plug to the RED socket and the WHITE plug to the WHITE socket.
NOTE:
1.
In some cases the Sound Bar volume output is affected by the volume level on the TV. In this
case adjust the TV volume to increase the audio output from the Sound Bar.
2.
If no sound can be heard from the Sound Bar using this connection, you may need to check your
TV settings to enable the headphone socket output.
1.6 Connecting a MP3 player
The following diagram shows the connection to an audio device such as an MP3 player, using a 3.5mm
audio cable.
1.
Connect one end of the 3.5mm audio cable to the headphone output of your MP3 player.
2.
Connect the other end to the AUX input (3.5 mm socket) on the back of the sound bar (8).
Summary of Contents for climax 2.1
Page 1: ...MILAN CLIMAX 2 1 CHANNEL SOUND BAR WITH HDMI USER MANUAL...
Page 17: ......
