8
MIKS
TER
®
SERVICE FUNCTIONS AVAILABLE TO THE USER:
Cell number
Description
F1
Setting the real time clock. Press the PRINT button
to go to the next parameter.
F2
Change of the recording frequency; range: 1 .. 240 minutes.
F3
Change of the access code to the service functions available
to the user; range: 0 .. 255
F4
Setting the heading, printed on the reports. Further details
in chapter
“SETTING THE PRINTOUT HEADINGS”
F5
Setting the display mode during the recording.
Further details in chapter
“DISPLAY MODES”
F6
Setting the temperature units:
0 – Fahrenheit
1 – Celsius
F7
Alarm zone, exceeding the minimum
temperature of the first probe; range: -50 .. 120
F8
Alarm zone, exceeding the maximum
temperature of the first probe; range: -50 .. 120
F9
Alarm zone, exceeding the minimum temperature
(or humidity) of the second probe; range: -50 .. 120
F10
Alarm zone, exceeding the maximum temperature
(or humidity) of the second probe; range: -50 .. 120
F11
Change of the intensity of the display light after going into
sleep mode; range: 10 .. 250
F12
Change of time after which the display goes into the sleep
mode: range: 0 .. 10 [s]
0 – means that the sleep mode is turned off
OPERATING MANUAL: LOGGICAR-E, VERSION 1.2
