Powering
The SQ series only accepts DC
⎓
power from Passive PoE injectors (one power supply and PoE injector are
included)
SXTsq Lite2
accepts 10-30 V DC
⎓
consuming at maximum load 5 W.
SXTsq Lite5
accepts 10-30 V DC
⎓
consuming at maximum load 6 W.
SXTsq 5 ac
accepts 10-28 V DC
⎓
consuming at maximum load 7 W.
SXTsq 5 High Power
accepts 10-28 V DC
⎓
consuming at maximum load 7 W.
Connecting to a PoE Adapter:
1. Connect the Ethernet cable from the device to the PoE+DATA port of the PoE adapter.
2. Connect an Ethernet cable from your local network (LAN) to the PoE adapter.
3. Connect the power cord to the adapter, and then plug the power cord into a power outlet.
Extension Slots and Ports
•
One Ethernet 10/100 Mbit (
SXTsq 5 ac –
Gigabit Ethernet), supporting automatic cross/straight cable
correction (Auto MDI/X), so you can use either straight or cross-over cables for connecting to other network
devices.
•
One Integrated Wireless:
•
SXTsq Lite2
2.4 GHz, 802.11b/g/n, antenna gain 10 dBi.
•
SXTsq Lite5
5 GHz, 802.11a/n, antenna gain 16 dBi.
•
SXTsq 5 ac
5 GHz, 802.11a/n/ac, antenna gain 16 dBi.
•
SXTsq 5 High Power
5 GHz, 802.11a/n, antenna gain 16 dBi.
Buttons and Jumpers
RouterBOOT reset button has the following functions. Press the button and apply the power, then:
•
Release the button when a green LED starts flashing, to reset RouterOS configuration to defaults.
•
Release the button when the LED turns solid green to clear all configuration and defaults.
•
Release the button after LED is no longer lit (~20 seconds) to cause the device to look for Netinstall
servers (required for reinstalling RouterOS over the network).
Regardless of the above option used, the system will load the backup RouterBOOT loader if the button is pressed
before power is applied to the device. Useful for RouterBOOT debugging and recovery.
Grounding
The device includes a grounding connection (marked )
⏚
which you should connect to the grounding installation of
the tower or building where the device will be used. This is to substantially reduce the risk of ESD and lightning
damage.
Accessories
Package includes the following accessories that come with the device:
•
EU/US Switching Power Supply 24V DC
⎓
, 0.38 A, 9 W, Level VI, cable:1.5 m.
•
Hose Clamp SUS304 (Phillips type; clamping diameter range 30-70 mm).
•
POE Injector with shielded connector/Gigabit POE injector.
See mikrotik.com/products for the latest version of this document.
Page 3, Document #52150 Modified on: 18.SEP.2019
