netPower 16P
netPower 16P (CRS318-16P-2S+OUT)
The netPower is a weatherproof switch with the capability of delivering PoE to your connected devices.
Safety Warnings
Before you work on any equipment, be aware of the hazards involved with electrical circuitry, and be familiar with standard practices for preventing
accidents.
Ultimate disposal of this product should be handled according to all national laws and regulations.
The Installation of the equipment must comply with local and national electrical codes.
This product is intended to be mounted outdoors on a pole. Please read the mounting instructions carefully before beginning installation. Failure to use the
correct hardware and configuration or to follow the correct procedures could result in a hazardous situation for people and damage to the system.
Use only the power supply and accessories approved by the manufacturer, and which can be found in the original packaging of this product.
Read the installation instructions before connecting the system to the power source.
We cannot guarantee that no accidents or damage will occur due to the improper use of the device. Please use this product with care and operate at your
own risk!
In the case of device failure, please disconnect it from power. The fastest way to do so is by unplugging the power plug from the power outlet.
It is the customer's responsibility to follow local country regulations, including operation within legal frequency channels, output power, cabling
requirements, and Dynamic Frequency Selection (DFS) requirements. All Mikrotik devices must be professionally installed.
Quickstart
Please follow these quick steps to set up your device:
Connect all served devices to Ethernet ports;
Connect the device to the power source (see "
");
Once connected to the same network, open
in your web browser to start configuration, user name: a
and there is no
dmin
password by default;
Once connected configure the device, so it has an active Internet connection
Upgrade the RouterOS software to the latest version
;
Set up your router password in the bottom field of the QuickSet menu, to the right and repeat it, it will be used to login next time.
Expansion slots and ports
